Customization: | Available |
---|---|
Communication Mode: | Full-Duplex & Half-Duplex |
Type: | Ethernet Switch |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Parameter | Specification | |
Model No.: | JX26GE1GFP1U-AI | |
Port Features | ||
Fixed Ports | Downlink Ports | 24 x 10/100/1000Base-T RJ45 ports |
Uplink Ports | 2 x 10/100/1000Base-T RJ45 ports + 1 x 1000Base-X SFP optical port slot | |
PoE Ports | Ports 1-24 support af/at standard PoE power supply, extended transmission distance 200 meters | |
Ethernet Port Features | 10/100/1000M auto-negotiation, Full/Half duplex, MDI/MDI-X auto-crossover | |
Twisted Pair Transmission | 10BASE-T: Cat3,4,5 UTP (≤100 meters) | |
100BASE-TX: Cat5 or later UTP (≤100 meters) | ||
1000BASE-T: Cat5e or later UTP (≤100 meters) | ||
Optical Port Features | Gigabit SFP fiber interface. Optical module not included by default (must be purchased separately). Options include Single-mode/Multi-mode, Single-fiber/Dual-fiber modules (LC/SC). | |
Optical Cable | Multi-mode: 850nm / 0-550M (50μm/125μm & 62.5μm/125μm) | |
Single-mode: 1310nm / 0-40KM, 1550nm / 0-120KM (9.5μm/125μm) | ||
DIP Switches | Position 1 | Port VLAN Function |
Position 2 | PoE Watchdog | |
Position 3 | Ports 1-8 Long-distance Transmission | |
Note: All function switches default to "OFF". Set to "ON" to enable. Each function can be used independently. | ||
Switching Chip Parameters | ||
Management Type | Non-managed | |
Network Protocols | IEEE 802.3 10BASE-T; IEEE 802.3i 10Base-T; | |
IEEE 802.3u 100Base-TX; | ||
IEEE 802.3x Flow Control; | ||
IEEE 802.3ab 1000Base-T; | ||
IEEE 802.3z 1000Base-X; | ||
IEEE 802.3af DTE Power via MDI; | ||
IEEE 802.3at DTE Power via MDI; | ||
Forwarding Mode | Store-and-Forward | |
Backplane Bandwidth | 54Gbps | |
Packet Forwarding Rate @64byte | 40.18Mpps | |
MAC Address Table | 4K | |
Packet Buffer | 4Mb | |
Jumbo Frame | 9.2K | |
LED Indicators | Power: PWR (Green); Network: Ports 1-26 (Green); Optical Port: Port 27 (Green) | |
MTBF | 100,000+ Hours | |
PoE & Power Features | ||
PoE Ports | Ports 1-24 support IEEE 802.3af/at standard PoE power supply | |
Power Supply Pins | Default: 1/2(+), 3/6(-) (4-pair powering) | |
Max PoE Power per Port | 30W, compliant with IEEE 802.3af/at | |
Total Power / Input Voltage | 400W (AC 100-240V) | |
Power Consumption | Standby: <10W; Full Load: <380W | |
Power Supply | Built-in Switching Power Supply AC: 100-240V 50-60Hz 6.5A | |
Physical Specifications | ||
Operating Temp/Humidity | -20°C to +55°C; 5% to 90% RH non-condensing | |
Storage Temp/Humidity | -40°C to +75°C; 5% to 95% RH non-condensing | |
Dimensions / Package (L*W*H) | 440*255*44mm / 508*298*93mm | |
Net Weight / Gross Weight | <3.4kg / <4.5kg | |
Installation | Desktop, Rack-mountable (1U) | |
Lightning Protection / IP Rating | Port Surge Protection: 4KV; Protection Class: IP30 | |
ESD Protection | Contact Discharge: 8KV; Air Discharge: 15KV | |