20km 1310nm Dual Fiber 10g SFP Transceiver with Ddm Function, LC Port

• Customization: Available
• Usage: Computer, Workstation, Server, Laptop, Switch/Media Converter
• Type: Wired
• Model NO.: JX1000-10G-SM1310-20KM
• Support Network: Ethernet
• Information content: Data
• Certification: CE, RoHS
• Condition: New
• Speed Rate: 10 Gbps
• Fiber Number: Dual Fiber
• Transmission Distance: 20km
• Wavelength: 1310nm
• Fiber Interface: SFP(LC)
• Transport Package: Carton
• Trademark: JIUXTC
• Origin: China
• Production Capacity: 63190 PCS Per Year

Product Description

20km  1310nm dual fiber 10G SFP Transceiver with DDM function,LC port


Description
10Gbps SFP+ Single-Mode Dual Fiber Transceiver, 20km, LC Connector

This 10 Gigabit SFP+ optical transceiver module provides high-speed, reliable connectivity for 10GbE applications over single-mode fiber (SMF). Featuring dual LC interfaces and operating at 1310nm wavelength, it supports transmission distances up to 20km.

Key Specifications & Features:

• Data Rate: 10.3125 Gbps (10 Gigabit Ethernet)

• Fiber Type: Single-Mode Fiber (SMF)

• Interface: Dual LC Connector (Separate Tx/Rx fibers)

• Wavelength: 1310nm (Tx) / 1310nm (Rx)

• Transmission Distance: 0-20km

• Supply Voltage: 3.3VDC
  Low power consumption, < 1W

• Digital Diagnostics Monitoring (DDM): Yes (SFF-8472 compliant). Real-time monitoring of temperature, voltage, Tx bias current, Tx optical power, and Rx optical power via I²C interface.

• Hot-Pluggable: Yes - Supports installation and removal without powering down the host device.

• Operating Temperature Range: -20°C to +70°C (Commercial Grade)  ;  Industrial:-40 to 85 °C

• Standards Compliance: Compliant with SFP+ MSA, IEEE 802.3ae 10GBASE-LR/LW.

• Low Power Consumption: Energy-efficient design suitable for high-density deployments.
  
   

Typical Applications:

• 10GbE Switches, Routers, and Network Interface Cards (NICs)

• Data Center Interconnects

• Enterprise Network Backbones

• Campus Network Links

• Storage Area Networks (SAN)

• Telecom Transport Equipment
  
   

Key Benefits:

• Cost-Effective 10G Solution: Ideal for medium-reach single-mode fiber connections.

• Enhanced Manageability: DDM enables proactive monitoring and simplified troubleshooting.

• High Reliability: Stable performance across the specified commercial temperature range.

• Easy Maintenance: Hot-pluggable design allows for swift module replacement.

• Interoperability: Guaranteed compatibility with standards-based SFP+ ports.
  
  
  Functional Diagram
  
  Absolute Maximum Ratings

  Parameter	Symbol	Min.	Max.	Unit	Note
  Supply Voltage	Vcc	-0.5	4.0	V
  Storage Temperature	TS	-40	85	°C
  Relative Humidity	RH	0	85	%

  Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.
   
• General Operating Characteristics

  Parameter		Symbol	Min.	Typ	Max.	Unit	Note
  Data Rate	Ethernet			10.3125		Gb/s
  	Fiber Channel			10.518
  Supply Voltage		Vcc	3.13	3.3	3.47	V
  Supply Current		Icc5		200	285	mA
  Operating Case Temp.		Tc	-20		75	°C
  		TI	-40		85

Electrical Characteristics (TOP(C) = -20 to 75 ºC, TOP(I) =-40 to 85 ºC,VCC = 3.13 to 3.47 V)

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Transmitter
Differential data input swing	VINPP	180		700	mVpp	1
Transmit Disable Voltage	VD	VCC-0.8		Vcc	V
Transmit Enable Voltage	VEN	Vee		Vee+0.8
Input differential impedance	Rin		100		Ω
Receiver
Differential data output swing	Vout,pp	300		850	mVpp	2
Output rise time and fall time	Tr, Tf	28	2.0	Vcc+0.3	Ps	3
LOS asserted	VLOS_F	VCC-0.8		Vcc	V	4
LOS de-asserted	VLOS_N	Vee		Vee+0.8	V	4

Note:
1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
2. Into 100Ωdifferential termination.
3. 20 - 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1's and four 0's sequence in the PRBS 9 is an acceptable alternative.
4. LOS is an open collector output. Should be pulled up with 4.7kΩ- 10kΩon the host board. Normal operation is logic 0; loss of signal is logic 1.

Optical Characteristics (TOP(C) = -20 to 75 ºC, TOP(I) =-40 to 85 ºC,VCC = 3.13 to 3.47 V)

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Transmitter
Operating Wavelength	λ	1260		1355	nm
Ave. output power (Enabled)	PAVE	-5		0.5	dBm	1
Side-Mode Suppression Ratio	SMSR	35			dB
Extinction Ratio	ER	3.5	4.1		dB
RMS spectral width	Δλ			1	nm
Rise/Fall time (20%~80%)	Tr/Tf			50	ps	2
Dispersion penalty	TDP			3.2	dB
Relative Intensity Noise	RIN			-128	dB/Hz
Output Optical Eye	Compliant with IEEE 0802.3ae
Receiver
Operating Wavelength		1260		1600	nm
Receiver Sensitivity(ER=4.5)	PSEN1			-14.6	dBm	3
Receiver Sensitivity(ER=6)	PSEN2			-1.4	dBm	3
Average Receive Power	PAVE	-14.2		+0.5	dBm
Receiver Reflectance	Rrx			-12	dB
LOS Assert	Pa	-28			dBm
LOS De-assert	Pd			-14	dBm
LOS Hysteresis	Pd-Pa	0.5		4	dB

Notes:
1. Average power figures are informative only, per IEEE 802.3ae.
2. Valid between 1260 and 1355 nm. Measured with worst ER; BER<10-12; 231 - 1 PRBS.
3. Valid between 1260 and 1355 nm. Per IEEE 802.3ae.

Pin Defintion And Functions

Pin	Symbol	Name/Description
1	VEET [1]	Transmitter Ground
2	Tx_FAULT [2]	Transmitter Fault
3	Tx_DIS [3]	Transmitter Disable. Laser output disabled on high or open
4	SDA [2]	2-wire Serial Interface Data Line
5	SCL [2]	2-wire Serial Interface Clock Line
6	MOD_ABS [4]	Module Absent. Grounded within the module
7	RS0 [5]	Rate Select 0
8	RX_LOS [2]	Loss of Signal indication. Logic 0 indicates normal operation
9	RS1 [5]	Rate Select 1
10	VEER [1]	Receiver Ground
11	VEER [1]	Receiver Ground
12	RD-	Receiver Inverted DATA out. AC Coupled
13	RD+	Receiver DATA out. AC Coupled
14	VEER [1]	Receiver Ground
15	VCCR	Receiver Power Supply
16	VCCT	Transmitter Power Supply
17	VEET [1]	Transmitter Ground
18	TD+	Transmitter DATA in. AC Coupled
19	TD-	Transmitter Inverted DATA in. AC Coupled
20	VEET [1]	Transmitter Ground

Notes:
1.Module circuit ground is isolated from module chassis ground within the module.
2.should be pulled up with 4.7k - 10k ohms on host board to a voltage between 3.15Vand 3.6V.
3.Tx_Disable is an input contact with a 4.7 kΩ to 10 kΩ pullup to VccT inside the module.
4.Mod_ABS is connected to VeeT or VeeR in the SFP+ module. The host may pull this contact up to Vcc_Host with a resistor in the range 4.7 kΩ to10 kΩ.Mod_ABS is asserted "High" when the SFP+ module is physically absent from a host slot.
5. RS0 and RS1 are module inputs and are pulled low to VeeT with > 30 kΩ resistors in the module.

Digital Diagnostic Specifications
The transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.
 

Parameter	Symbol	Units	Min.	Max.	Accuracy	Note
Transceiver temperature	DTemp-E	ºC	-45	+90	±5ºC	1,2
Transceiver supply voltage	DVoltage	V	2.8	4.0	±3%
Transmitter bias current	DBias	mA	0	127	±10%	3
Transmitter output power	DTx-Power	dBm	-2	+3	±2dB
Receiver average input power	DRx-Power	dBm	-20	+1	±2dB

1.When Operating temp.=0~70 ºC,the range will be min=-5,Max=+75
2. Internally measured
3. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser

Typical Interface Circuit

Recommended power supply filter
Note:
Inductors with DC resistance of less than 1Ω should be used in order to maintain the required voltage at the SFP input pin with 3.3V supply voltage. When the recommended supply filtering network is used, hot plugging of the SFP transceiver module will result in an inrush current of no more than 30 mA greater than the steady state value

Package Dimensions

Ordering Information
 

Part Number	Description
JX1000-10G-SM1310-20KM	SFP+,9.95 to 10.5Gb/s, 1310nm, 20km, -20~75ºC, with DDM
JX1000-10G-SM1310-20KM-I	SFP+,9.95 to 10.5Gb/s, 1310nm, 20km, -40~85ºC, with DDM