| Customization: | Available |
|---|---|
| Communication Mode: | Full-Duplex & Half-Duplex |
| Type: | Ethernet Switch |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
| Model No.: | JX24GE4GF-ISW-L3D-C |
| Port Features | |
| Fixed Ports | 24x 10/100/1000Base-T RJ45 ports (Downlink) ,4x 1/10G SFP+ optical port slots (Uplink) |
| Management port | 1x Console port (115200, 8, N, L) |
| Port Characteristics | 10/100/1000Base-T auto-negotiation, full/half-duplex, MDI/MDI-X auto-sensing |
| Twisted Pair Transmission | 10BASE-T: Cat3,4,5 UTP (≤100 meters), 100BASE-TX: Cat5 or later UTP (≤100 meters) ,1000BASE-T: Cat5e or later UTP (≤100 meters) |
| Optical Port Features | 10G/1G SFP fiber interface (modules not included; optional single-mode/multi-mode, single-fiber/dual-fiber modules, LC/SC) |
| Optical Fiber | Multi-mode: 850nm/0-550M, 50μm/125μm & 62.5μm/125μm, Single-mode: 1310nm/0-40KM, 1550nm/0-120KM, 9.5μm/125μm |
| Switching Chip Parameters | |
| Management Type | Layer 3 managed |
| Network Protocols | IEEE802.3 10BASE-T; IEEE802.3i 10Base-T , IEEE802.3u 100Base-TX, IEEE802.3x Flow Control,IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X,IEEE802.3ae 10GBase-SR/LR,IEEE 802.3ad port trunk with LACP,IEEE 802.1D Spanning Tree protocol,IEEE 802.1w Rapid Spanning Tree protocol, IEEE 802.1s Multiple Spanning Tree protocol ,IEEE 802.1p Class of service,IEEE 802.1Q VLAN tagging,IEEE 802.1x Port Authentication Network Control,IEEE 802.1ab LLDP |
| CPU | 800MHz |
| DRAM | 1Gbits |
| FLASH | 128Mbits |
| Forwarding Mode | Store-and-forward (full line-speed) |
| Backplane Bandwidth | 128Gbps (non-blocking) |
| Packet Forwarding Rate (@64 bytes) | 95.23Mpps |
| MAC Address Table | 16K |
| Packet Buffer | 12Mbits |
| Jumbo Frame | 12Kbytes |
| Indicator Lights | Power: PWR (green); System: SYS (green); Network: 1-24 L/A (100M green, 1000M yellow); SFP: 25-28 (green) |
| Reset Button | 1x (press and hold for 6 seconds to restore factory settings) |
| MTBF | ≥50,000 hours |
| Power Characteristics | |
| Total Power/Input Voltage | 30W (AC100-240V) |
| Power Consumption | Standby: <15W; Full load: <30W |
| Power Interface | Dual power input (AC/DC): AC prioritized, supports reverse polarity protection. AC input: 100-240V, 50-60Hz, 0.5A; DC input: 12V, 3 |
| Power Supply | Built-in AC switching power supply: 100-240V, 50-60Hz, 0.5A |
| Physical Specifications | |
| Operating Temperature/Humidity | -40°C to +75°C; 5%-90% RH (non-condensing) |
| Storage Temperature/Humidity | -40°C to +85°C; 5%-95% RH (non-condensing) |
| Dimensions (L*W*H) | 440*255*44mm(product size ) / 508*298*93mm(with packing box) |
| Net/Gross Weight | <3.8kg / <4.6kg |
| Installation | Desktop or 1U rack-mounted |
| Certifications & Warranty | |
| Lightning Protection | Port lightning protection: 6KV; Protection level: IP40 |
| ESD Protection | Contact discharge: ±8kV; Air discharge: ±15kV |
| Compliance | CE, RoHS,FCC |
| Warranty | 5 years |
| Management Features | |
| Port Features | Supports IEEE802.3x flow control (full-duplex), half-duplex backpressure |
| Supports forced port mode and speed | |
| Supports broadcast storm and port storm suppression | |
| Supports port rate limiting (16Kbps-1Gbps granularity) | |
| Supports real-time port traffic management (Flow Interval) | |
| Supports jumbo frame control (up to 16K packets) | |
| Supports optical port DDMI digital diagnostics | |
| IP Routing | Supports Layer 3 management, IPv4/IPv6 static/dynamic routing, and dual-stack management |
| Supports RIPv1/v2, RIPng | |
| Supports OSPFv1/v2, OSPFv3 | |
| Supports ARP protocol (up to 1024 entries) | |
| VLAN | Supports port-based VLAN (4K), IEEE802.1q |
| Supports protocol-based VLAN | |
| Supports MAC-based VLAN | |
| Supports Voice VLAN | |
| Supports Access, Trunk, Hybrid port configurations | |
| Supports QinQ configuration | |
| Supports GVRP VLAN protocol | |
| Port Aggregation | Supports static and dynamic aggregation (LACP) |
| Supports up to 14 aggregation groups, 8 ports per group | |
| Ring Network | Supports loop protection |
| Supports STP/RSTP/MSTP | |
| Supports ERPS ring network(Single-ring, multi-ring, intersecting ring, and tangentially connected ring configurations)(self-healing time <20ms) | |
| Multicast | Supports IGMP Snooping v1/v2/v3 (up to 1024 multicast groups) |
| Supports multicast VLAN | |
| Supports MVR | |
| Mirroring | Supports bidirectional port mirroring |
| Supports 1-to-many mirroring | |
| Supports up to 4 mirroring sessions | |
| QoS | Supports port, 802.1P, and DSCP/ToS priority (8 output queues per port) |
| Supports Equ, SP, WRR, SP+WRR scheduling modes | |
| Supports priority marking (Mark/Remark) | |
| Supports flow-based rate limiting, packet filtering, and redirection | |
| ACL | Supports L2-L4 packet filtering (matches first 80 bytes of packets) |
| Provides ACL definitions based on source MAC address, destination MAC address, source IP address, destination IP address, IP protocol type, TCP/UDP port, TCP/UDP port range, VLAN, etc. | |
| Supports ACL application based on ports and VLANs. | |
| Security | Supports user hierarchy and password protection |
| Supports IEEE802.1X port authentication | |
| Supports AAA&RADIUS and TACACS+ authentication | |
| Supports MAC address learning limit | |
| Supports MAC address blacklisting and binding | |
| Supports SSH 2.0 for secure login | |
| Supports port isolation | |
| Supports ARP rate limiting | |
| Supports IP source guard | |
| Supports ARP intrusion detection | |
| Supports anti-DoS attack | |
| Supports port broadcast suppression | |
| Supports host data backup/restore | |
| Supports IP+MAC+VLAN+port binding | |
| DHCP | Supports DHCP Server |
| Supports DHCP Client | |
| Supports DHCP Snooping v1/v2/v3 | |
| Management & Maintenance | Supports Web, CLI (Console, Telnet), SNMP (V1/V2c/V3) |
| Supports HTTP/HTTPS Web management | |
| Supports HTTP/TFTP file upload/download | |
| Supports RMON 1, 2, 3, and 9 groups | |
| Supports one-click factory reset | |
| Supports NTP and local clock | |
| Supports local and syslog logging | |
| Supports Ping detection | |
| Supports cable status check | |
| Supports real-time CPU usage monitoring | |
| Supports LLDP | |
| Supports NMS cluster management (LLDP+SNMP) | |
| System Requirements | Web browsers: Mozilla Firefox 2.5+, Google Chrome V42+ |
| Cat5e or higher Ethernet cables | |
| TCP/IP network adapter and OS (Windows, Linux, Mac OS) | |
| Package Contents | |
| Switch | 1 piece |
| Mounting Ears | 1 pair |
| Power Cord | 1 piece |
| User Manual | 1 copy |
| Warranty Card | 1 copy |
| Model No.: | Description | Standard Power |
| JX24GE4GF-ISW-L3D-C | Layer 3 managed switch with 24x 10/100/1000M ports and 4x 1/10G SFP+ uplink slots, built-in power supply, supports desktop/1U rack mounting. (AC+DC dual power input interface (single power supply standard configuration for shipment by default) |
AC100-240V |
| Name | Model No.: | Description | Unit |
| 1.25G Optical Modules | JX1000-1.25G-SM1310/1550-SC | SFP module, 1.25G, single-mode single-fiber SC, 3/20/40/60/80/100/120km, DDM, hot-swappable. | pairs |
| JX1000-1.25G-SM1310/1550-LC | SFP module, 1.25G, single-mode single-fiber LC, 3/20/40/60/80/100/120km, DDM, hot-swappable. | pairs | |
| JX1000-1.25G-LX-SM1310 | SFP module, 1.25G, single-mode dual-fiber LC, 3/20/40/60/80/100/120km, DDM, hot-swappable. | pcs | |
| JX1000-1.25G-SX-MM850 | SFP module, 1.25G, multi-mode dual-fiber LC, 550M, DDM, hot-swappable. | pcs | |
| 10G Optical Modules | JX1000-10G-SR-MM850-300M | SFP+ module, 10G, multi-mode dual-fiber LC, 300M, DDM, hot-swappable. | pcs |
| JX1000-10G-LR-SM1310 | SFP+ module, 10G, single-mode dual-fiber LC, 2/10/20km, DDM, hot-swappable. | pcs | |
| JX1000-10G-ER-SM1310 | SFP+ module, 10G, single-mode dual-fiber LC, 40km, DDM, hot-swappable. | pcs | |
| JX1000-10G-ZR-SM1550 | SFP+ module, 10G, single-mode dual-fiber LC, 40/80km, DDM, hot-swappable. | pcs | |
| JX1000-10G-T1270/R1330 | SFP+ module, 10G, single-mode single-fiber LC, 10/20/40/60/80km, DDM, hot-swappable | pairs | |
| JX1000-10G-T1490/R1550 | SFP+ module, 10G, single-mode single-fiber LC, 80km, DDM, hot-swappable. | pairs | |
| Electrical Module | JX1000-1000Base-T-100M | 1.25G SFP to 10/100/1000M RJ45 (fiber-to-copper converter). | pcs |
){kind=link}